incubator-general mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Justin Mclean <justinmcl...@gmail.com>
Subject Re: [VOTE] Release Apache DataSketches-cpp (incubating) 1.0.0 [RC2]
Date Wed, 18 Sep 2019 01:11:06 GMT
Hi.
If that content was in a NOTICE from a 3rd party ALv2 bit of software you
would include it, that is the case with Ratis. That is not the case with
your project. This is ASF policy not a legal requirement. Again please read
the links I've provided and ask your mentors for help.
Thanks,
Justin

On Wed, 18 Sep 2019, 01:55 Alexander Saydakov, <saydakov@verizonmedia.com>
wrote:

> > I would remove ALL content below line 9 ( currently lines 9 to 37), as
> all of that is LICENSE information and belongs in the LICENSE file not
> NOTICE
>
> Justin,
> I am confused. Are you proposing to move all attribution from NOTICE to
> LICENSE?
> We were told by our lawyer that all attribution belongs to NOTICE, and
> LICENSE should have applicable licenses only.
>
> I also see that you voted on Ratis saying that NOTICE is OK.
> I am looking at their NOTICE, and it has attribution almost exactly like in
> our NOTICE.
> Could you clarify please?
> Thank you.
>
> On Mon, Sep 16, 2019 at 5:15 PM leerho <leerho@gmail.com> wrote:
>
> > Thank you Justin for your clarification!
> >
> > Thank you Dave for your vote!
> >
> > Lee.
> >
> > On Mon, Sep 16, 2019 at 4:56 PM Dave Fisher <wave@apache.org> wrote:
> >
> > > +1 (binding)
> > >
> > > I checked:
> > > - incubating in name
> > > - signatures and hashes file
> > > - DISCLAIMER exists (WIP version)
> > > - LICENSE present - note it is being fixed for next version
> > > - NOTICE present - being fixed for next release.
> > > - no unexpected binaries
> > > - All source files have ASF headers with noted exceptions.
> > > - Can compile on OSX (Mojave) and all tests pass (if one follows the
> > > directions and uses the cmake variant.
> > >
> > > Regards,
> > > Dave
> > >
> > > > On Sep 9, 2019, at 12:05 PM, Alexander Saydakov <
> > > saydakov@verizonmedia.com> wrote:
> > > >
> > > > Dear IPMC and Community,
> > > >
> > > > This is a call for vote to release Apache DataSketches-cpp version
> > > > 1.0.0-incubating
> > > >
> > > > This is a C++ version of the DataSketches core library with Python
> > > bindings.
> > > >
> > > > This is the first release of this component.
> > > >
> > > > We are not going to release any artifacts besides the source code.
> > > >
> > > > Results from the PPMC vote:
> > > > 3 votes were cast. All of the votes were (+1). One of the votes was
> > from
> > > a
> > > > mentor.
> > > >
> > >
> >
> http://mail-archives.apache.org/mod_mbox/datasketches-dev/201909.mbox/thread
> > > >
> > > > The release candidate:
> > > >
> > >
> >
> https://dist.apache.org/repos/dist/dev/incubator/datasketches/cpp/1.0.0-incubating-rc2/
> > > >
> > > > Source repository:
> > > > https://github.com/apache/incubator-datasketches-cpp
> > > >
> > > > Git tag for this release:
> > > >
> > >
> >
> https://github.com/apache/incubator-datasketches-cpp/releases/tag/1.0.0-incubating-rc2
> > > >
> > > > The artifact has been signed with key:
> > > > pub  4096R/A8E8B4E0 2019-08-20 Alexander Saydakov (CODE SIGNING KEY)
> <
> > > > alsay@apache.org>
> > > > Fingerprint=40A2 47F6 1E8C 6C75 678C  69C5 6848 6114 A8E8 B4E0
> > > >
> > > > The public signing key can be found in the KEYS file:
> > > > https://dist.apache.org/repos/dist/dev/incubator/datasketches/KEYS
> > > >
> > > > Changes from the RC1:
> > > > - added license to make files
> > > > - building and running unit tests does not require pybind11
> (dependency
> > > for
> > > > Python bindings)
> > > > - better build instructions
> > > >
> > > > This library was intended to be header-only, but this goal was not
> > fully
> > > > achieved yet with CPC sketch code. This work is in progress.
> > > >
> > > > Building and running unit tests requires CppUnit.
> > > >
> > > > Installing CppUnit on OSX: brew install cppunit
> > > > Installing CppUnit on RHEL: yum install cppunit-devel
> > > >
> > > > There are currently two ways of building: using existing make files
> and
> > > > generating make files using cmake. Exsisting make files might not
> work
> > on
> > > > all platforms or with all C++ compilers. Generating make files using
> > > cmake
> > > > should solve this problem, but it currently requires cmake version
> > 3.12.0
> > > > or higher that might not be readily available as a package on all
> > > platforms.
> > > >
> > > > Installing the latest cmake on OSX: brew install cmake
> > > >
> > > > Building and running unit tests using existing make files:
> > > > $ make
> > > > $ make test
> > > >
> > > > Building and running unit tests using cmake:
> > > > $ mkdir build
> > > > $ cd build
> > > > $ cmake ..
> > > > $ make
> > > > $ make test
> > > >
> > > > Building Python bindings requires cmake 3.12 or higher and pybind11.
> > > > Please see the following document for details:
> > > >
> > >
> >
> https://github.com/apache/incubator-datasketches-cpp/blob/1.0.0-incubating-rc2/python/README.md
> > > >
> > > > This is the second stage vote. The vote will remain open for at least
> > 72
> > > > hours and at least 3 (+1) IPMC votes or a majority of (+1) are
> > acquired.
> > > >
> > > > Please vote accordingly:
> > > > [ ] +1 approve
> > > > [ ] +0 no opinion
> > > > [ ] -1 disapprove with the reason
> > > >
> > > > Thanks,
> > > > Alexander Saydakov
> > > > alsay@apache.org
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: dev-unsubscribe@datasketches.apache.org
> > > For additional commands, e-mail: dev-help@datasketches.apache.org
> > >
> > >
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message