Best Answer

Varies depending on the size of the bricks.

Paving blocks come in various sizes depending on the type of paving.

Standard paving blocks are are of pre cast concrete 100 mm by 200 mm the thickness varies. The heavier the traffic the thicker the blocks.

There are however, standard thickness's, 50 mm, 80 mm, and 100 mm are the most common.

For instance on a house driveway 50 mm blocks would be the most favoured, whilst on a dockyard which is used by heavy vehicles 100 mm blocks would be the choice.

You would need 50 standard blocks to cover one square metre.

🙏

🤨

😮

Q: How many paving brick are needed per sq metre?

Write your answer...

Submit

Related questions

You would also need to know what area each brick covers. Or what is the length and width of each brick - you can then figure out the area from that.

So you get the volume of one brick. Measure the length, width and height of one brick. Convert each to metres (/100 is you measured in centimetres). Now divide a cubic metre by the volume of 1 brick to get how many bricks would make a completely filled in cubic metre. Keep in mind, this method does not count any cement needed to secure the bricks

Joe needs 460 paving slabs to surrond the pond.

600mm is 0.6m, and 450mm is 0.45m, so one flag is 0.27 sq metre. Therefore 4 flags to the square metre

The answer, not surprisingly, depends on the size of the paving bricks. And since you have not bothered to share that crucial bit of information, I cannot provide a more useful answer.

60 bricks to 1 square metre for a wall 1 brick thick. 120 bricks to 1 square meter for a 2 brick thick wall. 10 standard concrete blocks to 1 square metre. 6 bricks equal 1 block. 1kg of mixed mortar per brick laid and 2.25 kg per block laid. On average use 5 wall ties in cavity wall construction per metre square

Paving Wall Street has 336 pages.

Area of each paving slab = 0.45 m* 0.45 m = 0.2025 square metres Therefore, number of pavers required = 15/0.2025 = 74.07 = 75 pavers. That is the mathematical answer and assumes that the 15 sq metre area is well behaved. That is to say, all the offcuts can be used without compromising the appearance.

378

The answer depends on the units used for the dimensions of the paving blocks.

There are 100 centimetres in 1 metre. Therefore, 100cm x 100cm converts to 1 metre x 1 metre = 1 square metre = 1 brick. This means that you will need 174 bricks to cover 175 square metres.

1000mm in a metre

65 as a cubic metre is 1000 litres

100cm per metre.

There are 1,000 millimetres in a metre.

There are 100 cm in a metre.

1000 millimetres in a metre

A metre is a unit of length. A square metre is a unit of area. The two units are therefore incompatible.

You would need a total of 160

100 and 150 kg of nails is what is needed for the 100 square metre.

There are 1000 millimetres in one metre.

There are 100 centimetres in a metre.

There Are 100cm In A Metre

There is 1 metre in 1 metre. There is 100 cm in 1 metre.

A lot !!

Study guides