madlib-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Frank McQuillan <fmcquil...@pivotal.io>
Subject Re: Installation issue - OSError: [Errno 2] No such file or directory: '/usr/local/madlib/Versions/1.10.0/ports/postgres'
Date Tue, 09 May 2017 16:47:36 GMT
Apologies on the RPM error, Atsushi.

The 1.11 release candidate is posted now
https://dist.apache.org/repos/dist/dev/incubator/madlib/1.11-incubating-rc3/
so you could use that RPM.

As Rahul mentioned, we are in the process of voting on the 1.11 release
currently.  However, I don't expect it to change.  Official release will
hopefully happen later this week.

Frank



On Tue, May 9, 2017 at 9:13 AM, Rahul Iyer <riyer@apache.org> wrote:

> +dev for the problem with RPM
>
> Hi Atsushi,
>
> Thanks for bringing this to our notice!
>
> We might have to remove the 1.10 binary from the Apache dist to avoid
> others from having this problem. We're in the process of releasing 1.11 and
> would redirect to that binary once that goes through the voting process.
>
> @Louis, could you please clear the `/usr/local/madlib` folder and try again
> with pgxn (or compiling from source as suggested by Markus)?
>
>
>
>
> On Mon, May 8, 2017 at 11:53 PM, Neki, Atsushi <
> neki.atsushi@jp.fujitsu.com>
> wrote:
>
> > Hi Louis, Rahul,
> >
> >
> >
> >
> >
> > It seems that the installation using RPM binary doesn’t work for 1.10.0.
> >
> > The RPM doesn’t have anything but hawq under ports directory.
> >
> >
> >
> > $ rpm -qlpi ./apache-madlib-1.10.0-incubating-bin-Linux.rpm | grep ports
> >
> >
> >
> > /usr/local/madlib/Versions/1.10.0/ports/hawq
> >
> >   (snip)
> >
> >
> >
> > For 1.9.1 RPM binary, it doesn’t look so.
> >
> >
> >
> > /usr/local/madlib/Versions/1.9.1/ports/greenplum
> >
> > /usr/local/madlib/Versions/1.9.1/ports/hawq
> >
> > /usr/local/madlib/Versions/1.9.1/ports/postgres
> >
> >
> >
> >
> >
> > Unfortunately, I have no idea about the problem with pgxn.
> >
> >
> >
> >
> >
> > Regards,
> >
> > Atsushi Neki
> >
> >
> >
> >
> >
> > *From:* Markus Paaso [mailto:markus.paaso@gmail.com]
> > *Sent:* Saturday, May 6, 2017 2:02 PM
> > *To:* user@madlib.incubator.apache.org
> > *Subject:* Re: Installation issue - OSError: [Errno 2] No such file or
> > directory: '/usr/local/madlib/Versions/1.10.0/ports/postgres'
> >
> >
> >
> > Hi Louis,
> >
> >
> >
> > I have installed madlib on Ubuntu 16.04 using following commands:
> >
> >
> >
> >
> >
> > PSQL_HOST="127.0.0.1"
> >
> > PSQL_DB="testing"
> >
> > PSQL_USER="testuser"
> >
> > PSQL_PASS="<some_strong_password_here>"
> >
> >
> >
> > psql -h $PSQL_HOST template1 -c "CREATE ROLE $PSQL_USER PASSWORD
> > '$PSQL_PASS'"
> >
> > createdb -h $PSQL_HOST $PSQL_DB -O $PSQL_USER
> >
> >
> >
> > sudo apt install -y cmake m4
> >
> > wget https://github.com/apache/incubator-madlib/archive/rel/
> v1.10.0.tar.gz
> >
> > tar -xzf v1.10.0.tar.gz
> >
> > cd incubator-madlib-rel-v1.10.0
> >
> > ./configure
> >
> > cd build
> >
> > make
> >
> > sudo make install
> >
> >
> >
> > MADLIB_USER="mad"
> >
> > MADLIB_PASS="$(openssl rand -base64 32)"
> >
> > psql -h $PSQL_HOST $PSQL_DB -c "CREATE USER $MADLIB_USER SUPERUSER
> > PASSWORD '$MADLIB_PASS'"
> >
> > PGPASSWORD="$MADLIB_PASS" /usr/local/madlib/bin/madpack -p postgres -c
> > $MADLIB_USER@$PSQL_HOST/$PSQL_DB install
> >
> >
> >
> > psql -h $PSQL_HOST $PSQL_DB -c "GRANT ALL PRIVILEGES ON SCHEMA madlib TO
> > $PSQL_USER"
> >
> >
> >
> >
> >
> >
> >
> > Best Regards,
> >
> > Markus Paaso
> >
> >
> >
> >
> >
> > 2017-05-05 20:11 GMT+03:00 Louis Leblanc <louisleblanc01@gmail.com>:
> >
> > Thanks Rahul,
> >
> >
> >
> > I tried both solutions (with pgxn and with the RPM package).
> >
> >
> >
> > I didn't make any change to  `/usr/local/madlib/Versions` after the
> > installation?
> >
> >
> >
> > Thanks.
> >
> >
> >
> > 2017-05-05 10:54 GMT-06:00 Rahul Iyer <riyer@apache.org>:
> >
> > Hi Louis,
> >
> > Just to clarify: did you use the pgxn to install or the RPM package
> > downloaded from Apache dist?
> >
> > And was there any change made to `/usr/local/madlib/Versions` after the
> > installation?
> >
> >
> >
> > I'm going to try to reproduce the issue on an Ubuntu VM, so would
> > appreciate your exact steps.
> >
> >
> >
> > - Rahul
> >
> >
> >
> > On Thu, May 4, 2017 at 8:41 AM, Louis Leblanc <louisleblanc01@gmail.com>
> > wrote:
> >
> > Thanks Rahul,
> >
> >
> >
> > - I used the process described here ==> https://cwiki.apache.org/
> > confluence/display/MADLIB/Installation+Guide#InstallationGuide-
> > PGXNInstallingfromPGXN(PostgreSQL)
> >
> > - I used the version apache-madlib-1.10.0-incubating-bin-Linux.rpm
> > <https://dist.apache.org/repos/dist/release/incubator/
> madlib/1.10.0-incubating/apache-madlib-1.10.0-incubating-bin-Linux.rpm>
> >
> > - Content of the folder `/usr/local/madlib/Versions` ==> 1.10.0
> >
> >
> >
> > Louis
> >
> >
> >
> >
> >
> > 2017-05-03 17:31 GMT-06:00 Rahul Iyer <riyer@apache.org>:
> >
> > Hi Louis,
> >
> > Please help us understand the problem further.
> >
> > - What was the process you used to install MADlib?
> > - Which version of MADlib did you install?
> > - Please print the contents of `/usr/local/madlib/Versions`
> >
> > - Rahul
> >
> >
> > On Wed, May 3, 2017 at 4:17 PM, Louis Leblanc <louisleblanc01@gmail.com>
> > wrote:
> > > Hello,
> > >
> > > I'm experiencing issues installing madlib on Ubuntu 16.04 with
> Postgresql
> > > 9.5.6.
> > >
> > > I followed the installation process, but I have an issue when I try to
> > > install madlib into postgres. I can't find the solution that's why I am
> > > hoping to get some help from you.
> > >
> > > Here is what I tried:
> > >
> > > ~$ /usr/local/madlib/bin/madpack -p postgres -c
> > > postgres@localhost:5432/testing install
> > >
> > > Traceback (most recent call last):
> > >   File "/usr/local/madlib/Versions/1.10.0/bin/../madpack/madpack.py",
> > line
> > > 1574, in <module>
> > >     main(sys.argv[1:])
> > >   File "/usr/local/madlib/Versions/1.10.0/bin/../madpack/madpack.py",
> > line
> > > 1163, in main
> > >     supportedVersions = [dirItem for dirItem in os.listdir(portdir)
> > > OSError: [Errno 2] No such file or directory:
> > > '/usr/local/madlib/Versions/1.10.0/ports/postgres'
> > >
> > >
> > > Thanks for your help,
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Markus Paaso
> > Tel: +358504067849 <+358%2050%204067849>
> >
>

Mime
View raw message