lucenenet-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Itamar Syn-Hershko <ita...@code972.com>
Subject Re: [TeamCity, FAILED] Build Lucene.NET :: Lucene.NET Core #57
Date Sat, 03 Jan 2015 19:09:29 GMT
I think this means the env is broken as well, but lets not deal with it
now...

--

Itamar Syn-Hershko
http://code972.com | @synhershko <https://twitter.com/synhershko>
Freelance Developer & Consultant
Author of RavenDB in Action <http://manning.com/synhershko/>

On Sat, Jan 3, 2015 at 5:42 AM, Laimonas Simutis <laimis@gmail.com> wrote:

> Itamar,
>
> Just now noticed that you had a question about this, regarding how it
> affects more than one test. Once Codec.Default was set to "incompatible"
> codec, all the tests that ran after that particular test were failing if
> they tried to write to the index. It basically put the environment into a
> broken state, so to speak.
>
> Laimonas
>
> On Wed Dec 31 2014 at 12:02:55 PM Itamar Syn-Hershko <itamar@code972.com>
> wrote:
>
> > Re the change in the Codec - makes sense, just lets make sure we don't
> > forget to bring it back when Prescott is done (Prescott, any ETA btw?)
> >
> > This seems to affect just one test not 400 though - or am I missing
> > something?
> >
>
>
> >
> > Anyway there were some similar failures in the past because the Codecs
> > weren't picked up correctly or tests weren't configured - I'll have a
> look
> > again to make sure this is not that all over again.
> >
> >
> >
> > --
> >
> > Itamar Syn-Hershko
> > http://code972.com | @synhershko <https://twitter.com/synhershko>
> > Freelance Developer & Consultant
> > Author of RavenDB in Action <http://manning.com/synhershko/>
> >
> > On Wed, Dec 31, 2014 at 6:04 PM, Laimonas Simutis <laimis@gmail.com>
> > wrote:
> >
> > > MemoryPostingsFormat is part of the Lucene.Net.Codecs project which I
> > > believe based on checkins Prescott is still working and we shouldn't
> add
> > to
> > > the tests just yet. Please correct me if I am off.
> > >
> > > Another alternative would be to set it to Lucene41xPostingsFormat but
> > > that's the same format that Default Codec uses before the branch is
> > > invoked. So that is kind of useless.
> > >
> > > At this point I would say we just comment the whole if branch out until
> > > MemoryPostingsFormat is ready. What do you guys say? I have a few other
> > > fixes ready, will go with commenting out route until I hear from
> someone
> > > else otherwise.
> > >
> > >
> > >
> > > On Wed Dec 31 2014 at 10:44:01 AM Laimonas Simutis <laimis@gmail.com>
> > > wrote:
> > >
> > >> I believe this is the culprit:
> > >>
> > >> https://github.com/apache/lucenenet/blob/master/src/
> > >> Lucene.Net.Tests/core/Index/TestRollingUpdates.cs#L51
> > >>
> > >> If that random get boolean returns true, the default codec is set
> > >> to Lucene3xPostingsFormat. That is the codec that throws that
> exception
> > we
> > >> see in the logs.
> > >>
> > >> Any test after TestRollingUpdates that tries to write to an index
> fails
> > >> as they all use Codec.Default. That matches what I see in the output
> > logs
> > >> where the failure starts with TestRollingUpdates unit test and then
> you
> > can
> > >> see it happen 1k times after.
> > >>
> > >> Java version is different from the ported .NET version:
> > >>
> > >> https://github.com/apache/lucene-solr/blob/lucene_solr_
> > >> 4_8_0/lucene/core/src/test/org/apache/lucene/index/
> > >> TestRollingUpdates.java#L45
> > >>
> > >> Instead of setting it to Lucene3xPostingsFormat, it sets it to
> > MemoryPostingsFormat.
> > >> Looking into the fix...
> > >>
> > >>
> > >>
> > >> On Wed Dec 31 2014 at 10:02:04 AM Laimonas Simutis <laimis@gmail.com>
> > >> wrote:
> > >>
> > >>> Itamar,
> > >>>
> > >>> I doubt that the latest changes is what did it. I just ran a full
> test
> > >>> suite locally on existing master and got the results that match what
> we
> > >>> would expect: 2206 pass, 481 fail.
> > >>>
> > >>> It is very much likely a case of random tests triggering a certain
> > >>> condition that sets default codec to 3x and then when test data is
> > created
> > >>> in Test Setup step these exceptions are being triggered. Again, it
> is a
> > >>> guess, but based on what I have observed. Also, keep in mind that I
> was
> > >>> seeing "System.NotSupportedException : this codec can only be used
> for
> > >>> reading" almost from the first full suite runs locally. I just chose
> > to not
> > >>> deal with them at that time as it is very inconsistent in how it can
> be
> > >>> reproduced.
> > >>>
> > >>> My approach right now is to run the full test over and over again
> with
> > >>> some modified logging to see if I can track down how Lucene3x codec
> > ends up
> > >>> being used for the tests that are writing data.
> > >>>
> > >>>
> > >>> Laimonas
> > >>>
> > >>>
> > >>> On Wed Dec 31 2014 at 8:45:13 AM Itamar Syn-Hershko <
> > itamar@code972.com>
> > >>> wrote:
> > >>>
> > >>>> IIRC this is due to some confuguration in the tests env not being
> > >>>> picked up
> > >>>> correctly. Since this only happened since your last change I'd
> revert
> > it
> > >>>> and work from there.
> > >>>>
> > >>>> --
> > >>>>
> > >>>> Itamar Syn-Hershko
> > >>>> http://code972.com | @synhershko <https://twitter.com/synhershko>
> > >>>> Freelance Developer & Consultant
> > >>>> Author of RavenDB in Action <http://manning.com/synhershko/>
> > >>>>
> > >>>> On Wed, Dec 31, 2014 at 1:36 PM, Laimonas Simutis <laimis@gmail.com
> >
> > >>>> wrote:
> > >>>>
> > >>>> > Looks much worse :)
> > >>>> >
> > >>>> > The tests are filled with "System.NotSupportedException :
this
> codec
> > >>>> can
> > >>>> > only be used for reading" failures. I actually ran into this
> locally
> > >>>> almost
> > >>>> > all the time whenever I did a full Lucene.Net.Tests solution
test
> > >>>> run. I
> > >>>> > used to wonder why TC tests did not fail in such way. So it
could
> be
> > >>>> that
> > >>>> > you need to hit the right set of circumstances to make it
happen.
> > >>>> >
> > >>>> > If after encountering these failures I run the tests by fixture
or
> > >>>> only
> > >>>> > certain area (e.g. Lucene.Net.Store), they all pass (the ones
that
> > >>>> don't
> > >>>> > have other issues). My guess is that it is an issue with cleanup
> > >>>> somewhere
> > >>>> > that is not happening properly cascading to the rest of test
> cases.
> > >>>> >
> > >>>> > I will investigate. Please share if anybody else have any
clues as
> > to
> > >>>> what
> > >>>> > is going on.
> > >>>> >
> > >>>> >
> > >>>> > Laimonas
> > >>>> >
> > >>>> >
> > >>>> > On Wed Dec 31 2014 at 4:15:42 AM Itamar Syn-Hershko <
> > >>>> itamar@code972.com>
> > >>>> > wrote:
> > >>>> >
> > >>>> > > Ok that doesn't look any better...
> > >>>> > >
> > >>>> > > --
> > >>>> > >
> > >>>> > > Itamar Syn-Hershko
> > >>>> > > http://code972.com | @synhershko <
> https://twitter.com/synhershko>
> > >>>> > > Freelance Developer & Consultant
> > >>>> > > Author of RavenDB in Action <http://manning.com/synhershko/>
> > >>>> > >
> > >>>> > > On Wed, Dec 31, 2014 at 11:10 AM, <tc@codebetter.com>
wrote:
> > >>>> > >
> > >>>> > > > Build Lucene.NET :: Lucene.NET Core #57 failed (Tests
failed:
> > 874
> > >>>> (466
> > >>>> > > > new), passed: 1396, ignored: 524).
> > >>>> > > > Agent: JetBrains-dotnet-agent02
> > >>>> > > > Build results:
> > >>>> > > > http://teamcity.codebetter.com/viewLog.html?buildId=177083&
> > >>>> > > buildTypeId=LuceneNet_Core
> > >>>> > > >
> > >>>> > > > Failed Tests Summary:
> > >>>> > > > Newly failed tests (466 tests, alphabetically ordered,
only
> > first
> > >>>> 100
> > >>>> > > > shown)
> > >>>> > > > ============================================================
> > >>>> ======
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Compressing.TestCompressingStoredFieldsFor
> > mat.
> > >>>> > > BaseStoredFieldsFormatTestCase.TestBinaryFieldOffsetLength
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Compressing.TestCompressingTermVectorsForm
> > >>>> > > at.TestNoOrds
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestBytesTwoDocumentsMerged
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestHugeBinaryValueLimit
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestSortedBytesTwoDocumentsMerged
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40PostingsFormat.BasePo
> > >>>> > > stingsFormatTestCase.TestDocsAndFreqs
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40PostingsFormat.BasePo
> > >>>> > > stingsFormatTestCase.TestDocsAndFreqsAndPositionsAndOffsetsA
> > >>>> ndPayloads
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40TermVectorsFormat.Bas
> > >>>> > > eTermVectorsFormatTestCase.TestMixedOptions
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene40.TestLucene40TermVectorsFormat.Bas
> > >>>> > > eTermVectorsFormatTestCase.TestRandom
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene42.TestLucene42DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestBooleanNumericsVsStoredFields
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene42.TestLucene42DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestLongNumericsVsStoredFields
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Lucene45.TestLucene45DocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestBytesTwoDocumentsMerged
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Perfield.TestPerFieldDocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestHugeBinaryValueLimit
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Perfield.TestPerFieldDocValuesFormat.BaseD
> > >>>> > > ocValuesFormatTestCase.TestTwoDocumentsMerged
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Perfield.TestPerFieldDocValuesFormat.BaseI
> > >>>> > > ndexFileFormatTestCase.TestMergeStability
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Codecs.Perfield.TestPerFieldPostingsFormat.BasePo
> > >>>> > > stingsFormatTestCase.TestDocsAndFreqs
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestAddIndexes.TestAddIndexesWithThreads
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestBinaryDocValuesUpdates.
> > TestUpdateFewSegments
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestConsistentFieldNumbers.TestSameFieldNum
> > >>>> > > bersAcrossSegments
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestDocValuesFormat.
> > BaseDocValuesFormatTestCase.
> > >>>> > > TestBytesTwoDocumentsMerged
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestDocValuesFormat.
> > BaseDocValuesFormatTestCase.
> > >>>> > > TestSortedSetTwoDocumentsLastMissingMerge
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterConfig.TestLiveChangeToCFS
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterForceMerge.TestBackgroundFor
> > >>>> ceMerge
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterMergePolicy.TestMaxBufferedD
> > >>>> ocsChange
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterReader.TestMergeWarmer
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterReader.TestReopenAfterNoReal
> > >>>> Change
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexWriterWithThreads.TestIOExceptionD
> > >>>> > > uringWriteSegmentWithThreadsOnlyOnce
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestIndexableField.TestArbitraryFields
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestMultiDocV
> > >>>> alues.TestBinary
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestMultiDocValues.
> > >>>> TestNumerics
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestNumericDocValuesUpdates.TestSegmentMerges
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestOmitNorms
> > >>>> .TestOmitNorms_Mem
> > >>>> > > > Lucene.Net.Tests.dll:
> Lucene.Net.Index.TestOmitTf.TestNoPrxFile
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> Lucene.Net.Index.TestPostingsFormat.BasePostingsFormatTestCase.
> > >>>> > > TestDocsAndFreqsAndPositionsAndOffsetsAndPayloads
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> Lucene.Net.Index.TestPostingsFormat.BasePostingsFormatTestCase.
> > >>>> > > TestDocsOnly
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestRollingUpdates.TestRollingUpdates_Mem
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSameToken
> > >>>> SamePosition.Test
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestSameTokenSamePosition.TestMoreDocs
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentMerger.Test
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > Lucene.Net.Index.TestSegmentMerger.TestBuildDocMap
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentReader.Test
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestSegmentReader.TestGetFieldNameVariations
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentRe
> > >>>> ader.TestNorms
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestSegmentReader.TestOutOfBoundsAccess
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > Lucene.Net.Index.TestSegmentReader.TestTermVectors
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentRe
> > >>>> ader.TestTerms
> > >>>> > > > Lucene.Net.Tests.dll:
> Lucene.Net.Index.TestSegmentTermDocs.Test
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentTermDocs.
> > >>>> TestBadSeek
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentTe
> > >>>> rmDocs.TestSkipTo
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestSegmentTermEnum.
> > >>>> TestTermEnum
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestSizeBoundedForceMerge.TestSingleMergeab
> > >>>> > > leTooLargeSegment
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> > >>>> > Lucene.Net.Index.TestSizeBoundedForceMerge.TestSingleNonMerg
> > >>>> eableSegment
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestStoredFieldsFormat.BaseStoredFieldsForm
> > >>>> atTestCase.
> > >>>> > > TestBulkMergeWithDeletes
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestStoredFieldsFormat.BaseStoredFieldsForm
> > >>>> atTestCase
> > >>>> > > .TestConcurrentReads
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestStoredFieldsFormat.BaseStoredFieldsForm
> > >>>> atTestCase
> > >>>> > > .TestIndexedBit
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestStoredFieldsFormat.BaseStoredFieldsForm
> > >>>> atTestCase
> > >>>> > > .TestReadSkip
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestStoredFieldsFormat.TestWriteReadMerge
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestStressIndexing2.
> > >>>> > > TestMultiConfig
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > Lucene.Net.Index.TestSumDocFreq.TestSumDocFreq_Mem
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.
> > TestTermVectorsReader.Test
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermVectorsReader.
> > >>>> > > TestDocsEnum
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsReader.
> > TestIllegalIndexableField
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsReader.TestOffsetReader
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsReader.TestPositionReader
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermVectorsReader.
> > >>>> TestReader
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> Lucene.Net.Index.TestTermVectorsWriter.TestDoubleOffsetCounting
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.
> > TestDoubleOffsetCounting2
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> > >>>> > Lucene.Net.Index.TestTermVectorsWriter.
> > TestEndOffsetPositionCharAnaly
> > >>>> zer
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestEndOffsetPosition
> > >>>> Standard
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestEndOffsetPosition
> > >>>> StandardE
> > >>>> > > mptyField
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestEndOffsetPosition
> > >>>> StandardE
> > >>>> > > mptyField2
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestEndOffsetPosition
> > >>>> StopFilter
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestEndOffsetPosition
> > >>>> WithCachi
> > >>>> > > ngTokenFilter
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestNoTermVectorAfter
> > >>>> TermVector
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.TestNoTermVectorAfter
> > >>>> TermVecto
> > >>>> > > rMerge
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > >
> Lucene.Net.Index.TestTermVectorsWriter.TestTermVectorCorruption
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.
> > TestTermVectorCorruption2
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermVectorsWriter.
> > TestTermVectorCorruption3
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum.Test
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum.TestEasy
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum.
> > >>>> TestIntersectBasic
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermsEnum.TestIntersectEmptyString
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > Lucene.Net.Index.TestTermsEnum.TestIntersectRandom
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum.
> > >>>> > > TestIntersectStartTerm
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum
> > >>>> .TestZeroTerms
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTermsEnum2.TestFiniteVersusInfinite
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum
> > >>>> 2.TestIntersect
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.
> > TestTermsEnum2.TestSeeking
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTermsEnum2.
> > >>>> > > TestSeekingAndNexting
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTieredMergePolicy.TestForceMergeDeletes
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTieredMergePolicy.TestForceMergeDeletes
> > >>>> MaxSegSize
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTieredMergePolicy.
> > TestIndexWriterDirtSimple
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTieredMergePolicy.TestPartialMerge
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTransactionRollback.TestRepeatedRollBacks
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTransactionRollback.TestRollbackDeletio
> > >>>> nPolicy
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > Lucene.Net.Index.TestTryDelete.TestDeleteDocuments
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Index.TestTryDelete.
> > >>>> > > TestTryDeleteDocument
> > >>>> > > > Lucene.Net.Tests.dll:
> > >>>> > > > Lucene.Net.Index.TestTryDelete.TestTryDeleteDocumentCloseAndR
> > >>>> eopen
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Search.BaseTestRangeFilter
> > >>>> > > > Lucene.Net.Tests.dll: Lucene.Net.Search.FuzzyTermOnS
> > >>>> hortTermsTest.Test
> > >>>> > > >
> > >>>> > > > Other failed tests (408 tests, alphabetically ordered,
only
> > first
> > >>>> 100
> > >>>> > > > shown)
> > >>>> > > > ============================================================
> > >>>> ======
> > >>>> > > > Changes included (5 changes)
> > >>>> > > > ====================================================
> > >>>> > > > Change 971b6a3201bf21732ba2c1e56e9e368212e72787
by itamar (0
> > >>>> file):
> > >>>> > > > Merge remote-tracking branch 'laimis/unicode_issues'
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > Change 645b21d198523f984c71da307beab445285dd879
by laimis (2
> > >>>> files):
> > >>>> > > > fixes for handling surrogate chars properly
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > Change 644f10169185efe27b49c11b0a4bbff303005380
by itamar (0
> > >>>> file):
> > >>>> > > > Merge remote-tracking branch 'laimis/dictionary_fixes'
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > Change 80e1f9226bcd026abd747de702f85721173cc36d
by laimis (1
> > >>>> file):
> > >>>> > > > make sure to use offset / length when comparing
uft8 buffer
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > Change 0a03242e5f104c55e11a632ea8307e47d05bd0d4
by laimis (2
> > >>>> files):
> > >>>> > > > use GetTryValue for dictionary lookups
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > see more information about changed files:
> > >>>> > > >
> > >>>> > http://teamcity.codebetter.com/viewLog.html?tab=buildChanges
> > >>>> Div&buildId=
> > >>>> > > 177083&buildTypeId=LuceneNet_Core
> > >>>> > > >
> > >>>> > > >
> > >>>> > > > ============================================================
> > >>>> > > ================
> > >>>> > > > Configure email notifications:
> > >>>> > > >
> > >>>> > http://teamcity.codebetter.com/profile.html?init=1&tab=userN
> > >>>> otifications
> > >>>> > > >
> > >>>> > >
> > >>>> >
> > >>>>
> > >>>
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message